Introduction
The metal-enclosed Distribution Board (DB) are designed to suit either a single or a three-phase electrical system. The two series (Type A and Type B, see chart below) can accommodate up to 18 modular widths, 28 standard models. The DB can be used as load centers in residential or commercial premises.

Wall-mounted Distribution Panel

Internal wiring of a Distribution Panel

 

LKE Type A Distribution Boards

LKE Type B Distribution Boards

Manufacturing Materials
- PE and N tinned copper terminal bars are used
- Tin plating protects against high humidity and prevents oxidization of the copper surface
- DB panel surface is coated with epoxy powder and oven-baked
- 1.2mm to 2.0mm electro-galvanized sheet steel is used for the enclosure (user specified)
- Able to withstand harsh industrial conditions (ip to IP32)

Standards
- IEC 60439-3 from the International Electrotechnical Committee
- BS 5486-13 from the British Standards
- VDE 0603 from Germany Standards
- MS 1445-3 from Malaysia Standards

Miscelleneous
- All DB doors feature a full 180 degrees horizontal opening angle
- LKE MCB, MCCB, Switch Fuses can be mounted on the DB
- Cut-out holes for incoming and outgoing cables
- Cable trays and trucking channels
- Simple installation

[ Back to Low Voltage Products ]

info@lke-electric.com